See the deliverable

What you actually receive.

Most inspectors describe their reports. Here is one. This is an illustrative, redacted sample of a pre-shipment inspection deliverable, showing how we present EL review, electrical results, sampling math, and findings, so a decision is easy to make.

Sample · Illustrative

Pre-Shipment Inspection Report

Report ref: PSI-SAMPLE-0000 · Client, factory and serials redacted

Sisoko Renewables

Independent solar PV inspection

Product545W bifacial module

Lot size7,200 pcs

SamplingISO 2859-1, AQL 2.5

InspectionVisual · EL · IV/Flash

DISPOSITION: HOLD

Lot held pending disposition of major EL findings. Minor cosmetic issues within limits. Re-inspection recommended after corrective action on the flagged strings.

Electroluminescence (EL) review

Grid of six solar module electroluminescence images; four flagged in gold for cracks or dead cells, two marked pass — Representative EL captures from the sampled modules. Flagged units show cell cracking or an inactive cell; every image is retained in the full report.

AQL sampling summary

Class	Acceptance criteria	Allowed	Found	Result
Critical	AQL 0.065	0	0	Pass
Major	AQL 2.5	10	14	Reject
Minor	AQL 4.0	14	9	Pass

IV / flash test (sample)

Module	Pmax (W)	Voc (V)	Isc (A)	FF (%)	Result
Module 003	546.2	49.6	13.9	79.1	Pass
Module 005	544.8	49.5	13.9	78.8	Pass
Module 001	531.0	49.2	13.7	76.4	Flag
Module 002	508.4	48.9	13.4	73.9	Fail

Findings

#	Finding	Severity	Recommended action
1	Cell cracking visible on 14 sampled modules (EL)	Major	Contain lot, root-cause the stringer/lamination step, re-inspect
2	One inactive (dead) cell, Module 002	Major	Segregate; investigate cell supplier lot
3	Power output below nameplate tolerance on 2 units	Minor	Re-flash under controlled conditions; verify calibration
4	Minor frame scuffing, within cosmetic limits	Minor	Monitor; no action required
5	Labeling and packaging conform to spec	OK	None

This document is a fictional, illustrative sample created to show report format only. All values, images, and identifiers are invented and do not represent any real client, factory, or shipment.

Your lot, your report

Get this level of evidence on your next shipment.

Tell us the product, factory, and timing, and we will scope an inspection that gives you a clear, defensible decision on the lot.

Request a Consultation View services

Evidence-first

Every image, every data point, nothing hidden behind a pass or fail stamp.

Start a project